Llama icon

01 llama.cpp. It begins with a name: llama.cpp.

llama.cppIt begins with a name, and the + of its C++, the language llama.cpp is written in.

PlusA plus with the icon’s own arms: 240 wide upright, 208 deep across.

LKeep the top and right arms and leave the centre empty: an L inside the +, its stem and foot touching at one point.

LeanIn a flash the bolt leans it: the L slants 30° on the baseline, every edge at 60.0°, on a grid of ideal triangles, with the bolt inside.

SoftenRound only the two outer corners. That is the Llama icon.

Two bladesA tall blade and a short foot, offset to the right, touching at one point.

60° everywhereAll four slanted edges lean at 60.0°: the blades are parallel parallelograms.

One diagonalThe upper blade’s right edge and the foot’s left edge are the same line, through the joint.

The split392 above, 208 below: close to two thirds to one third.

Steps of 120Five steps of 120 span the 600: the feet, the joint and the foot’s corner all land on them.

Soft outer cornersOnly the two 120° outer corners round off: cut back 53, on a circle of radius ≈ 92.

In Llama Sans and Llama Mono · U+E002, U+E001

llama.cpp

 Open in Llama llama.app

In small text and buttons the icon takes its capital form (U+E001), centred on the capitals, so it holds its own in a line of text:  Llama,  LLAMA.CPP.

Drawing: 600 × 600
Angle: 60.0° on all four slanted edges
Split: 392 : 208 (65 : 35)
Steps: five of 120 across 600: 0, 120, 240, 360, 480, 600
Corners: two 120° outer corners, cut back 53, radius ≈ 92
Colours: #111111 on light, #FAFAFA on dark
In Llama Sans: U+E000, cap-height tall on the baseline
Source: ggml-org/llama.brand · CC BY-NC 4.0